-
冬天工業超聲波清洗機的保養要注意什么?
-
可過濾循環的超聲波清洗設備介紹
-
中小型超聲波清洗機有什么使用共性嗎?
-
超聲波清洗機為什么不要用強酸強堿?
-
全自動超聲波清洗機在汽車制造業的應用范圍
-
恒溫超聲波清洗機的特點有哪些?
-
超聲波清洗適宜頻率有哪些?
-
低溫廢水回收設備的使用
-
多槽手動超聲波清洗機的使用
-
標準超聲波清洗機與非標準超聲波清洗機的區別
服務熱線電話
400-6188-756
實驗室超聲波清洗儀使用說明及注意事項
來源:http://www.ishihara2010.com/ 時間: 2024-06-24 瀏覽次數: 0
1.在塑料筐中盛入純凈水,并放入待洗物品,蓋上蓋子;
1. Pour purified water into a plastic basket, place items to be washed, and cover with a lid;
注意:清洗物待清洗部分需充分浸入水中,且水位不得過高。
Attention: The part of the cleaning material to be cleaned should be fully immersed in water, and the water level should not be too high.
2.連接電源,指示燈閃爍,確認機器已經通電,確保清洗槽內有適量純凈水;
2. Connect the power supply, the indicator light flashes, confirm that the machine is powered on, and ensure that there is an appropriate amount of pure water in the cleaning tank;
3.待機狀態下,調整時間和功率;
3. In standby mode, adjust the time and power;
5.全部設定完畢后,再次按動功率下方“ON”鍵即可啟動;
5. After all settings are completed, press the "ON" button below the power again to start;
4.清洗完畢后,及時將塑料筐中的污水倒入洗手臺;
4. After cleaning, promptly pour the sewage from the plastic basket into the washbasin;
5.及時在清洗槽中補充純凈水;
5. Timely supplement pure water in the cleaning tank;
6.歸位。
6. Return to position.
注意:
be careful:
1.保持清洗槽內水質干凈;
1. Keep the water quality in the cleaning tank clean;
2.注意清洗槽內水位,避免無水、少水及多水狀態下開機工作;
2. Pay attention to the water level in the cleaning tank to avoid starting up and working in dry, low, or high water conditions;
3.在保證清洗物件潔凈的前提下,盡可能間斷性工作;
3. Work intermittently as much as possible while ensuring the cleanliness of the cleaned items;
(一般控制在5~10分鐘/次,連續工作時長不宜超過30mins)
(Generally controlled at 5-10 minutes per time, and the continuous working time should not exceed 30mins)
4.請勿使用酒精、汽油等易燃溶液及強堿、強酸等腐蝕性溶液;
4. Do not use flammable solutions such as alcohol and gasoline, as well as corrosive solutions such as strong alkalis and acids;
5.注意用電。
5. Pay attention to electricity usage.
本文由超聲波清洗機友情奉獻.更多有關的知識請點擊: http://www.ishihara2010.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is a friendly contribution from ultrasonic cleaning machines. For more related knowledge, please click: http://www.jnthcsb.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned
相關產品
相關文章
-
超聲波清洗機的使用原理和分類及組成部件 2024-10-26
-
如何預防超聲波清洗機的漏電問題? 2024-10-18
-
超聲波清洗機漏電的常見原因 2024-10-18
-
超聲波清洗機清洗金屬后沖洗多久 2024-10-14
-
噴淋清洗機:噴淋清洗工藝知多少 2024-09-15
-
噴淋清洗機:淺談精密清洗工藝——噴淋清洗 2024-09-03
-
噴淋清洗機:噴淋清洗機具有哪些特點 2024-09-02
-
認識碳?xì)淝逑礄C(jī) 2024-08-27
-
聲波振板超聲波振盒內部結構原來是這樣的 2024-08-22
-
三槽水劑超聲波清洗機操作規程 2024-08-19