If the ultrasonic cleaning machine is not controlled properly, it will affect the normal operation and use of the cleaning machine. In order to ensure the actual use effect of the cleaning machine as much as possible, we can understand the actual use effect of the ultrasonic cleaning machine from the factors such as power density, ultrasonic frequency, cleaning time and temperature of the ultrasonic cleaning machine. The higher the temperature of the cleaning machine, the more favorable the dirt decomposition is. However, when the temperature reaches a certain range, it will affect the effect of ultrasonic and reduce the cleaning effect.

清洗機清洗時間越長，清洗時間越長。除特殊材料外，清洗液和污垢的種類、使用高功率密度處理困難零件、使用低功率密度精 密部件等因素，頻率氣化越低，頻率偏差效應越大，對于簡單表面、復雜表面和深孔，在工作時必 須使用高頻清洗機發(fā)出紊流聲，而且添加清潔劑很方便地將其掉。

The longer the cleaning time of the cleaning machine, the longer the cleaning time. In addition to special materials, the types of cleaning fluid and dirt, the use of high-power density to deal with difficult parts, the use of low-power density precision parts and other factors, the lower the frequency gasification, the greater the frequency deviation effect. For simple surfaces, complex surfaces and deep holes, high-frequency cleaning machines must be used to make turbulent sound during operation, and it is easy to remove them by adding detergent.

在超聲波清洗機工作中，盡量不提高溫度以防止正常運行，必 須控制清洗劑的安 全性，禁止超聲波清洗機中其他異常物體的下落，，應經(jīng)常維護和維護超聲波清洗機，因為建議應立即刪除掉在罐底的異物，更換或倒空清洗液一定在常溫下進行機器維護和清洗用品。

During the operation of the ultrasonic cleaning machine, the temperature shall not be raised as much as possible to prevent normal operation. The safety of the cleaning agent must be controlled, and the falling of other abnormal objects in the ultrasonic cleaning machine shall be prohibited. The ultrasonic cleaning machine shall be maintained and maintained frequently, because it is recommended to remove the foreign matters at the bottom of the tank immediately, When replacing or emptying the cleaning fluid, the machine maintenance and cleaning supplies must be carried out at room temperature.

超聲波清洗機正常工作時，應聽到超聲波和水箱均勻的聲音，不要攪動清洗液的表面，只應在清洗孔引起的噴水中，在保證清洗對象清潔的前提下，盡量不加熱和間歇工作，因為加熱和長時間超聲波會提高水箱內的溫度。

When the ultrasonic cleaning machine works normally, you should hear the uniform sound of ultrasonic and water tank. Do not stir the surface of cleaning solution. Only in the water spray caused by the cleaning hole, and try not to heat and work intermittently on the premise of ensuring the cleanness of the cleaning object, because heating and long-time ultrasonic wave will increase the temperature in the water tank.